1* 10/100/1000Base-T RJ45,24* 10G fiber SFP+ ports, 1*Console,without SFP module,WEB,Internal PS
OFS-MXF8GT8-I
8-port 10/100/1000Mbps +8-port 10Gbps SFP Fiber
Description:
Providing 178Gbps switching capacity, with 132.43Mpps forwarding performance, L2 / L3 full wire-speed forwarding. Its flexible networking capability ensures the stability of the network and the balance of the load link. With the modular design, it provides 8 10G SFP+ optical ports, 8 10/100/1000M RJ45 electrical ports, 1 Console port, which offers enough bandwidth for data aggregation and data exchange. With high bandwidth and low latency, pipe network.And in order to flexibly respond to the network requirements, users can select appropriate, 10G ports according to their needs.OFS-MXF8GT8-I is located in high-density access to the core data and the cloud computer network in the next generation, and this product also can be applied for the core and the aggregation of large Internet cafes, enterprise network and metropolitan area network.
Technical Specifications
Product Model
Fixed Port
8 *10G SFP+ optical ports,8 *10/100/1000M RJ45 adaptive electrical ports,1*Console Port
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 100Base-T;IEEE802.3u;1000Base-TX/FX;IEEE802.3ab 1000Base-T;IEEE 802.3ae、SFF-8431、SFF-8432
Network Media
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-TX: Cat6 or later UTP(≤100 meter)
Fiber Media
Multi-mode:550M- 2KM
Single-mode: 20/40/60/80/100KM
Backplane bandwidth
187Gbps
Packet forwarding rate
132.43Mpps
Jumbo Frames
12k bytes
Transfer Mode
Support store-forward mode and cut-through mode
IPv4/IPv6 Route
512/256
Packet Buffer
2MB
MAC Address Table
16K
VLAN ID
4K
Flash Memory Capacity
8M
Memory capacity
512MB DDR3 SDRAM
Power Supply
Internal PS:
Input AC90 ~ 260V
Max power
≤80W
Environment temperature
0 ~ +55℃
Storage temperature
-20 ~ +70℃
Feature:
l with 178Gbps backplane capacity, the industry the highest performance (1U TOR);
l hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 852.32Mpps, L2 / L3 full speed forwarding; able to be deployed in the Metropolitan Area Network and provide several last kilometer technology
l Safe and Reliable
1.provide DOS, DDOS, spoofing and virus defense; 2.support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology; 3.restrict the maximum number of hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy;
4.powerful ACL, support L2-L4 data filtering;
5.policy control list and flow regulation.
l Convenient Maintenance
1.able to be managed via Web, SNMP, CLI, telnet, etc;
2.support XModem protocol, use TFTP/ZMODEM for software upgrading and BootRom upgrading; 3.support SFP+, simultaneously downward compatible XFP;
4.support flexible port configuration;
5.enter or exit low-power condition from PHY.
Other Specifications :
VLAN
Port based VLAN ,802.1Q VLAN,IP based VLAN,MAC based VLAN
Security Feature
IP+MAC+PORT+VLAN binding,ARP inspection,DOS prevention,Port protection,IP source port protection
System Management
Support SNMP v1/v2,Support Console,Support TELNET,Support WEB interface
Installation
Wall mounts
Packing List
1× Switch
1×User Manual/Certificate of quality/Warranty card
1×power adapter
MTBF
100,000 hours
Weight & Size
Product Weight: 1.5 KG
Packing weight: 2.1 KG
Product size (L×W×H): 440mm× 280mm×44mm
Packing size(L×W×H): 530mm×330mm×95mm
Warranty
1-years
Ordering Information:
model
Product description
l hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 852.32Mpps, L2 / L3 full speed forwarding;able to be deployed in the Metropolitan Area Network and provide several last kilometer technology
1.provide DOS, DDOS, spoofing and virus defense;2.support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology;3.restrict the maximum number of hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy;
2.support XModem protocol, use TFTP/ZMODEM for software upgrading and BootRom upgrading;3.support SFP+, simultaneously downward compatible XFP;